GL1000 - Float Pivot Pins - 4
Up until now, float pins have been available only from Honda as part of a "Float Set" which includes the float. The Honda part number for the set is: 16013-567-004 -- Save big bucks buy buying through Randakk's!
GL1000 Float Pivot Pins
Float pins can be a bear to remove. Often they are bent or damaged in the process. Sometimes, they must be "sacrificed" to avoid breaking the float pivot posts cast into the carb body. Read item #10 is this list of Top Honda GL1000 Carb Rebuilding Mistakes.
Note: These will not fit GL1100 carbs! GL1100 float pins
Pins are made from precision ground alloy steel. They're cut to length to close tolerance and finish turned in a collet chuck.
They include the proper taper on one end (this is the end you should insert first...removal is always in the opposite direction). Be sure to de-burr the float pivot post bores on the carb body before installing these. Make sure the corresponding bores in the floats themselves are free of burrs as well. The float must pivot freely when installed for proper operation.
Note: Sold in sets of 4 float pins.
Is Universal Part: No
OEM Number(s): N/A
- 1975 Honda GL1000 GL1000 Goldwing
- 1976 Honda GL1000 GL1000
- 1976 Honda GL1000 GL1000-LTD
- 1977 Honda GL1000 GL1000 Goldwing
- 1978 Honda GL1000 GL1000 Goldwing
- 1979 Honda GL1000 GL1000 Goldwing