Free U.S Shipping over $100
or over $300 for international orders
exclusions apply*

Carb Parts

Fuel filters are no longer included in Randakk Master Carb Kits. But, it would be a crime to redo your carbs and not take prudent measures to ensure a pure fuel supply! I recommend the OEM Honda filter as a high quality replacement unit. More on the topic of aftermarket fuel filters here.

We now offer the optional Randakk High Performance Fuel Filter with sizes to fit virtually any carbureted motorcycle. Details here.

Left: Restored GL1000 Carbs by Jouko Tomminen of Lahti, Finland

Right: Restored GL1100 Carbs (by Randakk)


Testimonials: click here

Disclaimers: click here

For information on Randakk's Approved Honda Carb Rebuilder Program click here

Regarding GL1000 carbs, I strongly recommend that you retain the original 4 carb setup. You may be tempted to trash your carbs and go to a single carb conversion. These work well enough, but I don't personally recommend them. Most people who invest in these setups report significant performance "improvements." However, they are comparing their results with their dirty, poorly maintained and malfunctioning original carbs.

For more on that topic click here.

Allow me a little soapbox time. Early GL1000s are routinely criticized for having poor carburetion. The criticism has been repeated so often by so many that it has become accepted as fact. Here is my contrarian view: the early GL1000s have great carburetion setups! My personal '75 GL1000 show bike has flawless, near-linear carburetion…rheostat-like throttle response, no flat spots, starts easily, warms up fast enough and has a decent idle. My carbs are stock except for a few minor tweaks I make on all the carbs I service. I've owned and ridden many bikes. I believe the stock setup on a GL1000, properly maintained and tuned delivers results as good as you can reasonably expect on a 4 cylinder, 4 carb bike of this vintage with this level of performance.

If your carbs are clean (I mean REALLY), all your vacuum hoses are good, your air-cut off valve fresh, choke linkage free, butterfly pivots not worn out, floats set and operating correctly, vacuum pistons free, air and fuel filters fresh and you've synchronized AFTER all other tune-up issues are perfect, you should have excellent results. By the way, all bets are off if you've replaced the OEM exhaust with something else.

View as List Grid

Items 1-48 of 70

Page
per page
Set Descending Direction
  1. FLOAT SET - Honda GL1200 VF1100 VF1000 VT1100
    Part #
    16013-MB0-671
    Honda Float Set - Fits GL1200 GL1100 VF1100 VF1000 VT1100 VT1000 VT700 VF700 Genuine Honda Part 
  2. Fuel Mixture Screw - GL1200  - VT500 VT600 VT1100 - VF700 VF750 VF1000 VF1100
    Part #
    KL18-3685
    Fuel Mixture Screw with Spring, O-Ring, Washer and Plug Sold individually. Fits the following Honda models: GL1200 1987 VF700 1984-1987 VF750 1988 (except California) VF1000 1984-1986 VF1100 1984-1986 VT500 1983-1986 VT600 1988-1998 VT700 1984-1986 VT1100 1985-1994 
  3. Gaskets - Float Bowl - GL1200 - GL1500
    Part #
    200-3013
    GL1200/GL1500 Float Bowl Gaskets 
  4. Fuel Line clear 1/8" ID 1/4" OD
    Part #
    200-1800
    Motion Pro Clear Fuel Line - 1/8" Internal Diameter- 1/4" Outside Diameter. 25 foot Roll.  This hose can be used for float bowl overflow hose, carb sync gauge hose or petcock vacuum hose. 
  5. DOHC Four Float Bowl Drain Screws
    Part #
    200-3027
    Float Bowl Drain Screw with o-ring.    Head diameter 10mm Thread M6 x 0.8 x 10.5mm (stem length) Sold individually. Nice brass copy of the screws that fit the following Honda motorcycles: GL1100 
  6. DOHC Four Float Bowl Drain Screws
    Part #
    200-3026
    Float Bowl Drain Screw with o-ring.    Head diameter 12mm Thread M6 x 0.8 x 7.5mm (stem length) Sold individually. Nice brass copy of the screws that fit the following Honda motorcycles: GL1000 
  7. DOHC Four Float Bowl Drain Screws
    Part #
    200-3045
    Float Bowl Drain Screw with o-ring.    Head diameter 6mm                      Thread – M6 x 1.0  Overall Length – 25.5mm with just the thread and taper 19mm Sold individually. Nice brass copy of the screws that fit the following H... 
  8. Fuel Mixture Screw - GL1100 - CX500 - CBX - CB750
    Part #
    KL18-3686
    Fuel Mixture Screw.  Equivalent to OEM 16016-KC2-970 Fits Honda: CB400T (1980-1981) CM400 (1980-1981) CB450 (1982-1986) CM450 (1982-1983) CX500 (1980-1982) FT500 (1982-1983) GL500 (1981-1982) CB650 (1980-1982) CX650 (1983) GL650 (1983) CB750 (1980-1983) CB900 (1980-1982) CB1000 (1983) CBX (19... 
  9. Gasket - Float Bowl - GL1000
    Part #
    100-1505
    GL1000 Float Bowl Gasket Highest quality GL1000 Float Bowl Gasket. Constructed of superior material to resist the components of modern gasoline. Constructed with fabric-reinforced material. GL1000 Float Bowl Gaskets - Fabric Reinforced Note: Sold Individually - 4 needed for a set on the GL10... 
  10. Carb Float Bowl Gasket - CB750K 1969-1976
    Part #
    200-3011
    Rubber Float Bowl Seal / Gasket for the Honda CB750K.  1969-1976 4 needed for a set, sold individually KL18-2672 
  11. Fuel Line clear 1/8" ID 1/4" OD
    Part #
    200-1800-1
    Motion Pro Clear Fuel Line - 1/8" Internal Diameter- 1/4" Outside Diameter. Priced per foot - can be used for float bowl overflow hose. carb sync gauge hose 
  12. Screw - Pan Head - Zinc - 4mm x 16mm - Gold - Phillips - Pkg 25
    Part #
    XGB-040F-016X25
    Machine Screw Phillips Pan-Head 4x16 gold 25-pack 
    • Out of stock
  13. Fuel Mixture Screw - GL1200 1986 - VF500 1984-1985
    Part #
    KL18-3684
    Fuel Mixture Screw - equivalent to OEM 16016-KJ9-671 Fits Honda: GL1200 1986 VF500 (1984-1985) 
  14. Petcock - Honda - CB350 - CB360 - CB450
    Part #
    KL18-4150
    Petcock - Honda CB350 CB360 CB450 Equivalent to OEM 16950-292-000 Fits CB350/CL350/SL350 1968-1973 Fits CB360/CL360 1974-1976 Fits CB450/CL450 1965-1974 Made in Japan 
  15. Petcock - Honda - CB500T CB750 (1969-1974) SOHC
    Part #
    KL18-4129
    Petcock - Honda CB750 SOHC 1969-1974 CB500 Four Equivalent to OEM: 16950-300-020 
  16. Standard Float Post Repair Kit -Version B - Additional Float Pivot Posts (GL1100)
    Part #
    100-1118
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  17. Standard Float Post Repair Kit  - Version D - Additional Float Pivot Posts (DOHC-4)
    Part #
    100-1120
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  18. CBX Air Tees
    Part #
    100-1104
    If you're doing a concours quality CBX carb restoration, you will probably need the so-called "air tees." These are frequently deteriorated and sporadically available from Honda. The "air tees" are the main portion of Honda's "Joint Set D" - part #16036-422-004 (2 required). The current list price for this often "disco... 
  19. CBX Throttle Link Seal Set
    Part #
    100-1111
    Sold in sets of 4 only.If you're doing a CBX carb restoration to a high standard, you will need these throttle link seals. Every CBX carb rack I've ever touched had badly deteriorated seals.Until now, these have never been available as a separate item from Honda. Honda has always forced customers to buy the entire thro... 
  20. GL1000 Carb-to-Plenum Locating Dowels
    Part #
    100-1122
    RANDAKK EXCLUSIVE!!These dowels are hard to find elsewhere.GL1000 Carb-to-Plenum Locating Dowels - Set of 8 These have been accurately reproduced to accurate dimensions out of superior material.GL1000 Carb-to-Plenum Locating Dowels - set of 8Note: These are used on ??76 - ??79 Honda GL1000 carbs only. They are not used... 
  21. GL1000 Choke Linkage
    Part #
    100-1154
    RANDAKK EXCLUSIVE!!! These choke link attach parts are not available from Honda.GL1000 Choke Linkage Attach Kit - correct orientation of parts shown in right photo The choke linkage on a GL1000 has to be disconnected whenever the carbs are split from the plenum. Invariably, some of these bits ??take flight? whenever... 
  22. GL1000 Float Valve Retainers (NOT included in GL1000 Master Kit) - Set of 4
    Part #
    100-1112
    RANDAKK EXCLUSIVE!!! These clips are not generally available from Honda. GL1000 Float Valve Retainers These are precision stamped from stainless steel and incorporate the proper tension arc geometry.On the OEM clips - Honda settled for a type of metal "bluing" which is... 
  23. GL1000 Idle Discharge Port Jets (NOT included in GL1000 Master Kit) - Set of 4
    Part #
    100-1107
    Now available - exquisite reproductions of the previously unavailable Honda GL1000 idle discharge port jets.GL1000 Idle Discharge Port JetsGL1000 Idle Discharge Port Jet Location In the GL1000 Carb Rebuilding video, I caution against removing these jets and recommend checking and cleaning them in place. That's because... 
  24. GL1000 / GL1100 Air Filter Base Gasket
    Part #
    100-1155
    ANOTHER RANDAKK EXCLUSIVE!!!!This is the large rubber gasket that fits between the air filter housing and the top of the central plenum. GL1000 / GL1100 Air Filter Base Gasket This part has been discontinued by Honda. For reference, the Honda part number is: 17221-371-000.My piece is a perfect reproduction. Function... 
  25. Standard Float Post Repair Kit - Version A - Additional Float Pivot Posts (GL1000)
    Part #
    100-1117
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  26. Standard Float Post Repair Kit - Version D - Float Pivot Post Repair Kit (DOHC-4)
    Part #
    100-1116
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  27. GL1500 Intake Rubber Boots (aka Carb Holders...NOT included in Master Kit) - Set of 2
    Part #
    100-1158
    Tired of wrestling with decades old, hard-as-a-rock intake rubber boots (aka "carb holders") when you remove/install your GL1500 carbs? Do you fear this gruesome task and worry about damaging your carefully rebuilt carbs? If so, here is the answer.These high quality reproduction intake rubbers for GL1500 GoldWing model... 
  28. Carburetor Holders - DOHC-4 - Pkg 4
    Part #
    100-1159
    Tired of wrestling with decades old, hard-as-a-rock intake rubber boots (aka "carb holders") when you remove/install your DOHC-4 carbs? Do you fear this gruesome task and worry about damaging your carefully rebuilt carbs? If so, here is the answer. These high quality reproduction intake rubbers for DOHC-4 models are m... 
  29. CBX Choke Shaft Seal Set (NOT included in CBX Master Kit) - Set of 4
    Part #
    100-1110
    Sold in sets of 4 only.If you're doing a CBX carb restoration to a high standard, you will probably need these choke shaft seals. Reproduction Choke Shaft SealsSold in sets of 4 onlyUntil now, these have never been available as a separate item from Honda. Honda has always forced customers to buy the entire choke shaft... 
  30. GL1500 Petcock Repair Kit (NOT included in GL1500 Master Kit)
    Part #
    100-1145
    GL1500 Petcock Repair Kit High quality aftermarket Petcock Repair Kit for all 1988-2000 Honda GL1500s.Also fits:1991-2002 Honda ST1100 / ST1100 A (ABS)2003 Honda ST1100 P (Police)GL1500 Petcock Repair KitThis kit allows replacement of... 
  31. Float Pin Removal Tool
    Part #
    100-1147
    Another Randakk Exclusive!This clever tool helps remove stubborn float pins with less risk of breaking the float pin posts (stanchions), so you won??t need one of my float post repair kits! Created by my friend Bob Hagerman, these tools are made of hardened steel and will last a lifetime. Randakk's Float Pin Removal To... 
  32. Honda CBX Intake Rubber Boots
    Part #
    100-1161
    Tired of wrestling with decades old, hard-as-a-rock intake rubber boots (aka "carb holders") when you remove/install your CBX carbs? Do you fear this gruesome task and worry about damaging your carefully rebuilt carbs? If so, here is the answer. These high quality reproduction intake rubbers for the CBX are made to... 
  33. CBX Intake Rubber Boots (aka Carb Holders...NOT included in CBX Master Kit) - Set of 6 - Version B: '81 - '82
    Part #
    100-1160
    Tired of wrestling with decades old, hard-as-a-rock intake rubber boots (aka "carb holders") when you remove/install your CBX carbs? Do you fear this gruesome task and worry about damaging your carefully rebuilt carbs? If so, here is the answer. These high quality reproduction intake rubbers for the CBX are made to... 
    • Out of stock
  34. Float Pivot Post Repair Kit
    Part #
    100-1113
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  35. Standard Float Post Repair Kit - Version B - Float Pivot Post Repair Kit (GL1100)
    Part #
    100-1114
    Also available: Deluxe Float Post Repair Kit for GL1000 carbs. Testimonials: "Hi Randall, I have installed the CBX float pivot post repair kit you sent; nice easy fix & all well. Many thanks for a great product. Best. " Dave Hallam - Auckland New Zealand "Just wanted to say thanks for manufactu... 
  36. GL1100 Carb-to-Plenum AIR O-rings (included in GL1100 Master Kit) - Set of 4
    Part #
    100-1345
    GL1100 Carb-to-Plenum AIR O-rings (included in GL1100 Master Kit)These are the large carb-to-plenum AIR O-ring - 53.1 x 2.0 mm. Note: if you buy my GL1100 Master Carb Overhaul Kit, these o-rings are included. These are included in some aftermarket rebuild kits, but omitted in others.I've received so many requests... 
  37. GL1100 Carb-to-Plenum Special FUEL Seals (included in GL1100 Master Kit) - 2 Large & 2 Small
    Part #
    100-1209
    Now available - improved versions of Honda GL1100 carb-to-plenum fuel seals. GL1100 Carb-to-Plenum Special FUEL Seals New carb-to-plenum fuel seals are absolutely vital for a comprehensive carburetor overhaul on any 1980-1983 Honda GL 1100 GoldWing.If you split the carbs from the central air plenum (as you... 
  38. Fuel Seals, Made with Viton
    Part #
    100-1603
    Now available - improved versions of Honda GL1000 carb-to-plenum fuel seals.GL1000 Carb-to-Plenum Special FUEL Seals New carb-to-plenum fuel seals are absolutely vital for a comprehensive carburetor overhaul on any 1975-1979 Honda GL 1000 GoldWing. When I do a carb overhaul on a GL1000, it takes me 6+ hours of labor t... 
  39. Intake Manifold
    Part #
    100-1170
    Dyno Chart GEN II improvements include OEM-sized o-ring grooves where the intakes mate to the cylinder heads. A set of Viton intake o-rings now included with each order.Includes comprehensive installation guide (45+ pages). As installed and tested on RC003 The ultimate carb conversion for GL1000/GL1100. Dual Weber 40I... 
  40. Honda GL1000 Carb Rebuild DVD Video
    Part #
    100-1185
    Included in the video is 3 hrs, 16 minutes of content! This is the best 3 + hours of video production since Spartacus...another great epic! View 30 Second Trailer...be sure your speakers are turned on! (Consider this best value "Combo" offer ...Randakk's GL1000 Carb Rebuilding DVD + Randakk's GL1000 Maste... 
  41. GL1000 / GL1100 Petcock Repair Kit (included in GL1000 and GL1100 Master Kit)
    Part #
    100-1196
    GL1000 / GL1100 Petcock Repair Kit (included in GL1000 and GL1100 Master Kit) Note: This kit is also suitable for early GL1200 models that use 1/4" fuel hose (5.5mm). Generally this means most 1984-1986 GL1200 models. Not for 1987 models or 1986 models that use 3/8" fuel hose (10mm). Better than OEM quality... 
  42. GL1000 Plenum Gasket (included in GL1000 Master Kit)
    Part #
    100-1338
    Improved Second Generation RANDAKK version! Made of genuine Viton. My second generation GL1000 Plenum Gasket incorporates significant material, shape and density improvements engineered into the design by my rubber engineer.Works better and is... 
  43. GL1100 Plenum Gasket (included in GL1100 Master Kit)
    Part #
    100-1347
    Improved Second Generation RANDAKK version! Made of genuine Viton . My second generation GL1100 Plenum gasket incorporates significant material, shape and density improvements engineered into the design by my rubber engineer. Works better and is less expensive than the OEM item (which is not made of Viton). I... 
  44. GL1000 Float Pivot Pins (NOT included in GL1000 Master Kit) - Set of 4
    Part #
    100-1208
    RANDAKK EXCLUSIVE!Up until now, float pins have been available only from Honda as part of a "Float Set" which includes the float. The Honda part number for the set is: 16013-567-004 -- Save big bucks buy buying through Randakk's! GL1000 Float Pivot Pins Float pins can be a bear to remove. Often they are bent or damaged... 
  45. High Performance Fuel Filter - 3/8 Inch Inlet/Outlet
    Part #
    100-1148
    Filter Testing at Virginia International Raceway on RC-003 Filter Inlet/Outlet Size Filter Fitment Models 1/4 inch All Honda GL1000s All Honda GL1100s Honda GL1200: All '84-'85 models and most '86 models depending on original market destination. Early DOHC-4 models. Early CBX models. Any other c... 
  46. High Performance Fuel Filter
    Part #
    100-1149
    Filter Testing at Virginia International Raceway on RC-003 Filter Inlet/Outlet Size Filter Fitment Models 1/4 inch All Honda GL1000s All Honda GL1100s Honda GL1200: All '84-'85 models and most '86 models depending on original market destination. Early DOHC-4 models. Early CBX models. Any other c... 
  47. Honda CX500 - Randakk Master Carb Overhaul Kit® Version B
    Part #
    100-1218
    WORLD'S BEST CX500 KIT! FROM $84.99 A, B & C Versions Available. There are important component differences, so be sure to order the correct version for your bike! See: Additional Fit Details courtesy of good friend, the late, Dick Smith (aka Dick in Raleigh). http://www.randakksblog.com/honda-cx500-and-variants... 
  48. Honda GL1100 Carburetor Repair Guide
    Part #
    100-1186
    *Repair Guide written by noted GL1100 guru Howard Halasz. Available exclusively from Randakk's Cycle Shakk.Artwork Courtesy of Howard Halasz and Randakk's Cycle Shakk, LLC - all rights reserved Testomonial:"Just thought I would send a couple of pics of my carbs that I rebuilt with your GL1100 Master Carb Kit. Howard Ha... 
View as List Grid

Items 1-48 of 70

Page
per page
Set Descending Direction