Control Unit - Electronic - M.Unit Bluetooth - Motogadget

The new m.unit blue is an improved version of the tried and true m-unit by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps and, most notably, Bluetooth® LE. This enables the m.unit blue to be connected to the ‘m.ride’ smartphone App. This feature is unique for motorcycle accessories. The m.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during the operation and without having to remove the m.unit. The secure, encrypted Keyless Go function can also be used. When this function is activated and you approach your bike with your smartphone, the on-board electrical system is activated and the bike is ready to be started. The m.unit blue is the digital control unit for your bike – the heart of the entire on-board electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions. There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time. When using the m.button, all switch connections are reduced to one single cable.

Features WITH smartphone and m.ride App

Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and m.unit blue energy usage.

Keyless Go (the on-board electrical system is switched on when you approach the bike with your smartphone).

Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.).

Alarm system mode and sensitivity can be adjusted.

The on board voltage can be monitored in the App.

Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.

Real-time audio fault messages issued via the helmet headset.

Outputs can be switched manually via smartphone (except for starter).

Firmware updates provided anywhere via smartphone and App without removal.

Setup menu can be configured anywhere via smartphone and App without removal.

Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.

Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.

Parking position display and Ping! for help locating the vehicle.

LIN bus connection for connecting to compatible motogadget products at a later date.

Technical Requirements

The following Android models are currently compatible:

Samsung Galaxy S7/S7 Edge

Samsung Galaxy S6/S6 Edge

Samsung Galaxy S5/S5 Neo

Samsung Galaxy Note 4

Samsung Galaxy Note 5

Samsung Galaxy Tab A (2016)

Samsung Galaxy Tab 4 7.0

Samsung Galaxy Tab S2 10.5

Google Pixel/ Pixel XL

Google Nexus 5

Google Nexus 5X

LG G4

LG G5

Sony Experia Z3 Compact

M-Unit Blue

Approx. 500 mm (20") connecting cable for battery positive terminal with 10 mm² (7 Gauge) cross section

2 cable eyes

1 x M5 stainless steel bolt

2 x M5 stainless steel bolts with hex nuts

1 x speed sensor with 2 magnets

Dimensions and Specifications:

L/W/H: 101 x 61 x 28 mm (4" x 2.4" x 1.1")

Weight: approx. 180 g

Mounting: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive

Operating voltage: 6V - 20V

Operating temperature: -20 °C... +80 °C

Inputs:

1 x input (+12V switched) for ignition lock or m-Lock

11 x control pilot inputs (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch, kick stand switch, LIN-Bus, AUX1 and AUX2

Outputs:

10 x Outputs (+12V) for left turn signal, right turn signal, Lo-beam, Hi-beam, starter, horn, brake light, ignition, AUX1 and AUX2