Float Pin - GL1500 - Pkg 2

EXCLUSIVE!!! IMPOSSIBLE TO FIND ANYWHERE ELSE, FROM ANYBODY, AT ANY PRICE UNTIL NOW... THESE ARE NEW! Package of two Honda GL1500 float pins.

Up until now, float pins have been available only from Honda as part of a "Float Set" which includes the float. The Honda part number for the GL1500 float set is: 16013-MAM-000 which currently lists for $34.60 each. So, to get 2 float pins, you would have to spend $69.20 at full retail!

GL1500 Float Pivot Pins

Float pins can be a bear to remove. Often they are bent or damaged in the process. Worse, ham-fisted removal efforts unfortunately can result in broken float pivot posts which ruins the whole carb body. Be careful removing these! Liberal and patient soaking with PB Blaster or equivalent is advised before you attempt removal.

Our float pins are designed specifically for the Honda GL1500. They are made from from precision machined stainless steel stock to precise dimensions. They are cut to length to very close tolerances. One end has a useful bevel.

Be sure to de-burr the float pivot post bores on the carb body before installing these. Make sure the corresponding bores in the floats themselves are free of burrs as well. The float must pivot freely when installed for proper operation.