Sprocket - Front - Spacer Washer - 25mm x 36mm x 6.0mm

6mm Sprocket Spacer with 25mm center - can be used with 518 series front sprockets on Suzuki GS models. Can be also used on other bikes to off-set the front sprocket. Please ensure enough of the front sprocket is on the output shaft spline and there is clearance for the chain to clear engine cases and frame tubes. This washer goes on the OUTSIDE of the sprocket! Not between the case and the sprocket. The early GS series bikes came equipped with a countershaft sprocket that was sandwiched in rubber. Use this in place of that rubber.